Custom Logo Cat6 RJ45 Connector UTP Modular Plug 8P8C – OEM Private Label, 3-Prong 50µ” Gold Plated Contacts, 100% Virgin PC Material

Custom Logo Cat6 UTP RJ45 Connector – OEM Private Label 3-Prong Gold Plated Modular Plug

The custom logo Cat6 unshielded RJ45 modular plug from PROUNTA lets network brands, cable manufacturers, and national distributors sell connectors under their own name — without owning a factory. Your logo is applied by precision laser engraving or in-mold embossing directly on the plug body, and the entire packaging chain — PE bags, inner boxes, blister packs, and master cartons — is printed to your brand guidelines. Underneath the branding sits a genuine Category 6 connector: staggered gold plated contacts, an insert load bar, and a housing molded from 100% virgin polycarbonate, delivering certified performance to 250MHz over Category 6 cable for Gigabit Ethernet and short-run 10GBASE-T networks.

PROUNTA is a factory-direct RJ45 connector manufacturer with in-house pin stamping, nickel/gold electroplating, injection molding, laser marking, and 100% Fluke DSX component testing. That vertical integration is what makes reliable private-label supply possible: one facility, one quality system, one accountable partner for your brand.

Two Ways to Put Your Logo on the Plug

We offer two proven branding methods, each suited to a different order profile. Laser engraving marks your logo, brand name, or model code onto the plug body with permanent, high-contrast precision — no tooling cost, artwork changes allowed between batches, and MOQ from just 10,000 pcs, making it ideal for first-time private-label programs. In-mold embossing builds your logo into the injection mold itself, producing a raised or recessed mark that is part of the plug and can never rub off; it suits established brands ordering 100,000+ pcs per SKU who want a premium, tamper-proof identity. Both methods are applied to the clear housing without affecting latch strength, dimensional tolerance, or electrical performance, and we supply a free digital mockup plus physical pre-production samples for sign-off before mass production.

Genuine Cat6 Electricals Behind the Brand

A logo only builds your brand if the product behind it performs. This plug uses the industry-standard two-piece Cat6 architecture: conductors thread through a load bar that stages them in a staggered high/low pattern, controlling near-end crosstalk (NEXT) and return loss at the termination point — the parameters where low-cost “Cat6” plugs fail Fluke certification and generate warranty claims against your name. Contact blades are stamped from high-elasticity phosphor bronze, nickel underplated, then finished in hard gold from 3µ” to 50µ”. The 3-prong (tri-fork) design drives three staggered tines through the insulation into the copper core, giving redundant contact points, ≤20mΩ contact resistance, and dependable crimps on both solid and stranded 23–26AWG conductors — including sustained PoE/PoE+ loads.

100% Virgin PC Housing – Sharp Logos, Zero Recycled Resin

Logo definition depends on material quality. This connector is molded exclusively from 100% virgin polycarbonate (Teijin/Covestro grade): the crystal-clear, bubble-free surface takes laser marking with crisp edges, resists cracking and whitening under crimp pressure, and keeps the latch flexible through repeated insertions. The housing is UL 94V-2 flame retardant and holds ±0.05mm dimensional tolerance, so every branded plug seats perfectly in standard RJ45 jacks, keystones, and patch panels. Recycled-resin plugs, by contrast, produce blurry marks, cloudy bodies, and brittle latches — risks no brand owner should take.

Technical Specifications

Who Orders Custom Logo Cat6 Plugs?

This OEM program serves cable and connectivity brands adding connectors to their catalog, national distributors building house brands, patch cord factories whose end customers require branded components, and system integrators standardizing branded consumables across projects. Because the plug follows the universal 8P8C modular connector geometry, your branded product inter-mates with every standard RJ45 jack and remains backward compatible with Cat5e installations.

How the OEM Process Works

Send us your logo file and packaging requirements, and our team returns a free digital mockup within 24 hours. After you approve pre-production samples — shipped with Fluke DSX-8000 component test data — mass production begins, typically completing in 7 to 15 days. We also support mixed-SKU consolidation, so one container can carry your branded Cat6 plugs alongside our pass-through RJ45 plugs, Cat6A & Cat8 shielded plugs, or items from the full Cat6 & Cat5e unshielded range. Ready to start? Contact our OEM team for a free logo mockup and same-day quotation.

Frequently Asked Questions

Q1: What is the MOQ for a custom logo, and is there a tooling fee?
Laser engraving starts at 10,000 pcs with no tooling fee. In-mold embossing requires a one-time mold modification charge and suits volumes of 100,000+ pcs per SKU. Both are negotiable for long-term programs.

Q2: Will the logo wear off or affect performance?
No. Laser marks are permanent surface alterations, and embossed logos are part of the molded body. Neither method touches the contact zone, latch, or critical dimensions, and every branded batch still passes 100% Fluke DSX component testing.

Q3: Can you match our brand’s packaging exactly?
Yes. We print PE bags, header cards, boxes, and cartons to your artwork, including barcodes, multilingual labels, and regional compliance marks. Housing color tints are also available for full brand differentiation.

Q4: How do I protect my brand from quality problems?
Every batch is traceable to plating records and Fluke test reports shipped with the goods. We sign OEM confidentiality agreements and never resell customer-branded designs or artwork to third parties.

Q5: Can I get branded samples before committing to mass production?
Yes. After the free digital mockup, we produce physical pre-production samples with your logo for approval. Unbranded engineering samples of the base connector are free for qualified B2B buyers.